$25 VIP and Air Fill
We provide our dive community with a thorough inspection and full transparency reports. We will remove any and all stickers to fully inspect your cylinder. We inspect for any pitting or corrosion, conditions of the valve threads, temperature damage, and other visual checks. Every VIP includes a complete break down of the valve including the burst disk to ensure proper working conditions. Any cylinder that will be used for anything over 21% oxygen, will need to be oxygen cleaned. We will treat your cylinder as it is one of our own.
$25 Tumbling / O2 Clean
Any tumbling or oxygen cleaning required will require an additional charge to the VIP and Air Fill. Steel tanks often will require tumbling to remove internal rust due to temperature changes throughout the year. To help reduce the need for tumbling, keep your tanks from drastic temperature swings and don't allow your tanks to go below 500 psi. All tumbled tanks will be fully O2 cleaned.
ATTENTION
We have the right to reject any cylinder for any reason. What we don't have, is the right to condemn your tanks. No Visual Inspector has the authority to condemn a tank, unless they are RIN (Requalifer Identification Number) certified where they are required by the Department of Transportation (DOT) to condemn a cylinder.
We will reject the following cylinders:
Any cylinder potentially made with the aluminum alloy 6351-T6:
Special permit numbers 6498, 7042, 8107, 8364, 8422, 7235, 8023, or 8115
Luxfer DOT-E-7235 before August 1989
Walter Kiddie Company before February 1990
Parker Hanifan before July 1990
Luxfer 3AL:
S30 and S63 before May 1988
S40 before June 1988
S50 and S92 before April 1988
S72 and S100 before August 1987
S80 before January 1988
S80.8 before May 1987
Any other cylinder made before 1990
Any cylinder where the cylinder markings are unreadable
Any cylinder that has been painted after the current hydrostatic date
Any cylinder that has been altered
These are implemented for the safety of our staff, customers, and dive community members. Feel free to contact us before purchasing a tank so that we can help ensure that you are getting a safe cylinder.
A visual tank inspection is a critical step in scuba diving safety, ensuring that your diving equipment is in optimal condition before venturing into the underwater world. This meticulous examination involves a detailed visual assessment of the scuba tank's exterior and interior components to detect any signs of damage, corrosion, or contamination that could compromise its integrity or performance.
Visual Tank Inspection: Ensuring Safety and Reliability
Preparation:
Before commencing the inspection, the tank is securely positioned in a well-lit and designated inspection area. It's essential to work in a clean and organized environment to facilitate thorough examination and accurate assessment of the tank's condition.
External Inspection:
The visual inspection begins with a comprehensive examination of the tank's exterior surface. The inspector carefully scrutinizes every inch of the tank for visible signs of damage, including dents, scratches, or abrasions. Special attention is paid to critical areas such as the neck, valve threads, and bottom of the tank, where damage is most likely to occur.
Valve Inspection:
Next, the inspector focuses on the tank valve, a crucial component that controls the flow of air in and out of the tank. The valve is examined for any signs of corrosion, leakage, or malfunction. The valve handle is checked for smooth operation, and the sealing surfaces are inspected to ensure a tight seal when the valve is closed.
Interior Inspection:
With the valve removed, the inspector peers into the tank's interior to assess its cleanliness and condition. Using a high-intensity flashlight and a mirror, they carefully examine the interior walls for rust, corrosion, or foreign debris. Any traces of moisture or contaminants are noted and addressed to ensure the purity of the breathing air.
Certification Markings:
Throughout the inspection process, the inspector verifies the tank's certification markings to confirm compliance with industry standards and regulations. These markings indicate the tank's design specifications, maximum pressure rating, and certification status, providing assurance of its suitability for diving.
Documentation:
As the inspection progresses, detailed records are maintained to document findings, observations, and any corrective actions taken. This documentation serves as a vital reference for future inspections and helps ensure accountability and traceability of the inspection process.
Final Assessment:
Once the visual inspection is complete, the inspector conducts a final assessment to determine the tank's overall condition and suitability for use. If any issues or concerns are identified during the inspection, appropriate measures are taken to address them, whether it's repair, maintenance, or replacement of the tank or its components.